[VintageLambo] Re: Espada bushings & zerks

Hi George, > While you"re at it, see if the rear lower A-frame outboard bushings > will take grease through the Zerk fittings.Mine didn"t.Tear- down > revealed one sleeve was corroded enough to be loose, which was the > cause of some on-off torque steering at speed.A new sleeve and end > seals fixed it with a couple of evenings" work and $159 in readily > available parts. I am just going through the same proceedure with my 400gt.Can you tell me where you got the parts?And a quick description of how you installed them? Thanks so much, Fred PS: Note to everybody -- make sure you keep those particular Zerks filled with grease!Not only does it lubricate, but almost as importantly, it pushes out moisture thus preventing the corrosion George is talking about.Sadly, I did not follow this proceedure over the years, so mine are shot too.:(