[VintageLambo] Window drive

Yeah! Finished my driver"s side window drive refurb. Now goes up and down like a rocket. The idea to use the patio rollers was great. I mounted the relays in the door just in front of the window, under the vent window area. Also added some foil faced insulation. Getting the cable wound back right was a bit of work. Make a printed diagram first, I did, and it saved me plenty of time. While the motor is out, remove the gear cover and clean out the old grease and add moly lifter lube. Now on to the pass side. I had to superglue my Ducellier switch, and now it"s fine in both directions. If there is some interest, I have some photos I can throw to Jack, he can put them on the files tab, along with the S1 drive diagram and the schematic for 4 to 2 wire conversion. Doc